Oce Arizona T220UV User Manual - page 14
Océ | T220UV Product Overview
1-2
3010102780-B
Ink: ............................................... Océ Display Graphic Systems T220UV
UV-curable pigment Ink
Resolution: ................................... 309 dpi
Throughput: ................................. 4 Pass Mode - Up to 170 sq. feet (15.8 sq.
meters) per hour
8 Pass Mode – Up to 85 sq. feet (7.9 sq.
meters) per hour
Minimum Media Size: .................. 6” wide x 6” long (15cm x 15cm)
Max. Media Size: ......................... 62” wide x 120” long (158cm x 305cm)
Max. Print Size: ........................... 62.5” wide x 120.5” long (159cm x 306cm
Max. Media Thickness: ................ 2” (5cm) thick
Printer Dimensions: ..................... Table – 70.5” x 168”
Gantry – 36” x 120”
Weight: ........................................ 2300 lbs (1043 kg.)
Air Requirement: Pressure: ......... 80 to 100 psi min.
Flow: 1cfm min.
Air supplied to the printer must pass through an Air Preparation Unit that contains the
following:
•
Air Filter – 5 micron element c/w auto drain; Coalescing Filter – 99.97%
efficiency c/w auto drain; and Regulator c/w gauge.
1.1.3
Printer Power Requirements
The printer operates in the following two configurations.
Delta (USA) Configuration:
Voltage:...................... 230VAC +/-10%, 3 Phase
Frequency:................. 50 or 60 Hz
Current:...................... 25AMPS maximum steady state
Power: ....................... 15kW max.
Circuit Breaker........... 30 Amps
Wye (European) Configuration:
Voltage:...................... 400VAC +/-10%, 3 Phase
Frequency:................. 50 or 60 Hz
Current:...................... 13 AMPS maximum steady state
Power: ....................... 15kW max.
Circuit Breaker........... 30 Amps