Oce Arizona T220UV User Manual - Nozzle Print
Océ | User Interface
2-36
3010102780-B
Test Prints
The Test Prints menu allows you the option of printing three documents stored in the
Arizona T220UV printer:
•
Nozzle prints (Diagnostic and Standard - see page 60 for details)
•
Configuration print
•
Color bars print
NOZZLE PRINT
The Nozzle Print menu provides you with a visual representation of how the print
heads are firing. Follow these steps to select the type of Nozzle Print:
1. Press the MENU button once at the online screen. Then press the
ACCEPT button at OPERATOR menu. You then see:
OPERATOR
/maintenance
2. Press ACCEPT or MENU once. You then see:
OPERATOR /test prints
3. Press ACCEPT. You then see: TEST PRINTS /nozzle print
type: standard / diagnostic
4. Press ACCEPT when standard is displayed and the print menu in Step
10 appears, or
5. Press ACCEPT when diagnostic is displayed and you then see the
following options::
NOZZLE PRINT /write mode: 2x
6. Press ACCEPT. You then see:
NOZZLE PRINT
dir: bidir L<-->R
7. Press ACCEPT. You then see:
NOZZLE PRINT 1 pass
Use the +/- buttons to select the number of passes (1 -100), and press ACCEPT.
8. Press ACCEPT. You then see:
NOZZLE PRINT
vertical offset from origin: x.xx m
Use the +/- buttons if you want to change the print origin
. For a diagram
explaing vertical offset, see “T220UV Printing Direction and Offsets” on