Oce Arizona T220UV User Manual - Emptying The Waste Bottle
Emptying the Waste Bottle |
6/2/04
4-75
4.2
Emptying the Waste Bottle
The printer accumulates waste that is made up of ink and accumulated debris. The waste
bottle is located in the right side of the gantry and is accessible by opening the gantry
doors. A sensor monitors the waste level in the bottle, and a high level is reported on the
control panel.
Figure 23 Gantry Doors Open Showing Waste Bottle
The waste bottle should be emptied when the control panel indicates that the waste bottle
is almost full. To empty the waste bottle:
1.
Remove the waste bottle from the bracket and pour the waste into a suitable
container for disposal. Dispose of waste in accordance with local laws or as directed
in the UV ink MSDS sheets — See “Safety Information” on page 4.
2.
Put a cloth or paper towel in place to catch any drips while the bottle is emptied.
3.
Replace the empty container by fitting it into the bracket;
4.
Ensure that the lid is securely screwed on to the waste bottle.
Note:
If you need to replace the waste bottle container with a new one, or if you
require a spare bottle, order part # 3010100266.