Oce Arizona T220UV User Manual - page 85
Océ Ink |
6/2/04
4-73
3.
Place the attached lid on the new ink bottle and screw it on tightly;
4.
Dispose of the used ink in an environmentally friendly manner.
5.
Press ACCEPT on the control panel to enter the type of color and then scan the bar
code of that ink bottle before you begin printing.
4.1.2
Scanning Ink Barcodes
Whenever you replace an ink bottle scan the new bottle’s barcode. The T220UV printer
calculates the amount of ink used for each color printed and determines when the volume
for a bottle of a particular color ink is used. It also retains a record of previous barcodes.
If you are prompted to enter the barcode from a bottle of ink you may not necessarily
have an empty ink bottle. If you changed the ink bottle without scanning it, eventually
you will see the following display.
1.
Navigate to the Operator\Barcode menu and select the color of ink to change. Press
ACCEPT to continue and you will see the following display.
Caution:
Do not use the residual ink to top up the ink in another bottle as this
will introduce contaminants that collect at the bottom of the bottle.
Warning:
Océ Display Graphics Systems accepts no liability when non-Océ ink
is used. Customers using non-Océ ink assume all risk of damage that
might result. Customer agrees to waive any claims or rights they may
otherwise have against Océ Display Graphics Systems or its agents for
damage and/or loss of business resulting from use of non-Océ ink.
Ink Barcode expired
Press ACCEPT to continue
Scan barcode (Light Magenta)
ACCEPT -> Manual Entry