Oce Arizona T220UV User Manual - Printing A Job
Océ | Operating the Arizona T220UV
3-52
3010102780-B
3.2
Printing a Job
The following are basic guidelines for printing an image with the Arizona T220UV:
1.
Press the MENU button on the control panel to enter the menu system. The Print
Queue menu is always the first main menu option.
2.
Press ACCEPT to enter the Print Queue menu.
The LCD panel displays the most recent job sent to the print queue by the host
(i.e., PosterShop).
You have four possible choices:
a) Press CANCEL to quit viewing the print queue and proceed to the next
main menu option which is the Operator menu.
b) Press MENU or BACK to return to the Print Queue menu.
c) Press the + or - keys to cycle through all avaliable print jobs.
d) Press ACCEPT to confirm that you want to pr0ceed with the displayed
print job.
3.
Press ACCEPT and the control panel display shows the following print information.
Thickness and offsets values are retained from the previous time these values were
entered. Ensure that they are appropriate to the current media and print job. If not, use
the method described below to change them.
[ 0] Test Image 8B
(H * V [mm] 271 * 1289, Offsets (+ 0 * +755)
Job number & file name
Pass mode
Direction
mode
Image Offsets
Image Size
Thickness: 00.250mm, UV: 80%
Offsets: H +0mm, V +755 mm (+/- to change)