Oce Arizona T220UV User Manual - page 19
Safety Information |
6/2/04
1-7
Handling and Storage
Exposure Controls
UV Light Shields
On the T220UV printer there are two brushes that acts as a UV Light Shield on the front
and back edge of the gantry. These brushes prevents stray UV light from emanating into
the work environment by providing a flexible barrier that at the same time
accommodates media on the table up to 2" (51mm) in thickness. If either of these
brushes gets deformed, contaminated, or altered in any way, it must be replaced. Call
your service representative if a replacement brush is needed.
Table 5 Ink Handling and Storage
Handling
Precautions:
Toxic or severely irritating material. Avoid contacting and avoid
breathing the material. Use only in a well ventilated area. As with
all chemicals, good industrial hygiene practices should be followed
when handling this material. Avoid contact with material, avoid
breathing dusts or fumes, use only in a well ventilated area. Wash
thoroughly after handling. Do not get in eyes, on skin or clothing.
Remove contaminated clothing and wash before reuse.
Storage
Conditions:
Store in a cool dry place.
Isolate from incompatible materials.
Table 6 Exposure Control
Engineering
Measures
Local exhaust ventilation or other engineering controls are
normally required when handling or using this product to avoid
overexposure. It is recommended that facilities storing or using this
material be equipped with an eyewash and safety shower.