Oce Arizona T220UV User Manual - Preface
Copyright |
6/2/04
-vii-
Preface
0.1
Copyright
© 2004 Océ Display Graphics Systems. All rights reserved.
This document contains information proprietary to Océ, to its subsidiaries, or to third
parties to which Océ may have a legal obligation to protect such information from
unauthorized disclosure, use or duplication. Any disclosure, use, or duplication of this
document or of any of the information contained herein for other than the specific purpose
for which it was disclosed is expressly prohibited, except as Océ may otherwise agree to in
writing. Due to continuing research and product improvements, features or product
specifications may change at any time without notice.
0.2
Current Document Version
0.3
Product Support and Service
0.3.1
Responsibilities of Operator and Service Technician
Arizona T220UV Operator
The operator of the Arizona T220UV must be properly trained. Océ provides training for
the operator in the use of the Arizona T220UV hardware and software at the time of
installation. It is the customer's responsibility to ensure that only properly trained personnel
operate the printer.
Operators of the Arizona T220UV should be fully versed in the operation of Onyx
PosterShop® . For any operator unfamiliar with its operation, Onyx PosterShop® training
is required. On-site or off-site training courses are available; contact Onyx Graphics
Corporation for more information:
http://www.onyxgfx.com/support_training.html
The operator or other trained personnel are expected to handle all user maintenance as
detailed in the User Guide, and also replacement of consumable parts (except print heads).
If your site has a technician in charge of printer maintenance, that person is the optimal
candidate. While any trained operator may perform routine maintenance, the best
maintenance results from familiarity with the printer's internal operation and history.
Date
Doc. Number
Revision
Summary
03/06/04
3010102780
B
Customer release