Qlogic 3200 Series User Manual - -Pa
5–Fibre Channel Noninteractive Commands
-pa (Define Port Alias)
5-30
SN0054667-00 B
To bind multiple targets with a single command, repeat the following group:
<target wwnn> <target wwpn> <target port id> <target id>
To bind all targets on a specific adapter or to bind all targets on all adapters, issue
the following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn> | all) bind all
Where:
To unbind a specific target, issue the following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn>) (remove <target
wwnn> | unbind <target wwnn>)
Where:
To unbind all targets on a specific adapter port or on all adapter ports, issue the
following command:
# qaucli -pr fc -p (<hba instance> | <hba wwpn> | all) (remove all
| unbind all)
Where:
-pa
(Define Port Alias)
With this command you can:
Define the port alias for a specific adapter port (1)
Delete the port alias from a specific adapter port (2)
View the port alias for a specific adapter port (3)
To define a port alias for the specified adapter, issue the following command:
# qaucli -pr fc -pa (<hba instance> | <hba wwpn>) <alias>
target port id = Port ID of the target
target id = ID to which the target is bound
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target wwnn = World wide node name of the target
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter