Qlogic 3200 Series User Manual - page 227
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 B
9-41
Edit Configured Port Settings Menu
2. CNA iSCSI Configuration2. Port Configuration
From the Port Link Configuration menu, select the Edit Configured Port Settings
Menu option to open the Port Link Settings Menu with options to view configured
port settings, change the port iSCSI alias, configure port firmware settings, restore
legacy 4010 default port settings, and save changes. For example:
Port Link Settings Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display Configured Port Settings
2: Change Port iSCSI Alias Name
3: Port Firmware Settings Menu
4: Legacy 4010 Restore Default Port Settings
5: Save changes and reset HBA (if necessary)
Display Configure Port Settings Select this option to view the configured port
settings. For example:
--------------------------------------------------------------------------------
*** Displaying ISCSI Settings inst=1 ***
Force_Negotiate_Main_iSCSI_Keys : off
iSCSI_Send_Markers : off(*)
iSCSI_Header_Digests : off
iSCSI_Data_Digests : off
iSCSI_Immediate_Data : on
iSCSI_Initial_R2T : off
iSCSI_Data_Seq_In_Order : on(*)
iSCSI_Data_PDU_In_Order : on(*)
iSCSI_CHAP_Auth : off(*)
iSCSI_Bidi_CHAP_Auth : off(*)
.
.
.
Values noted with (*) are read only.
--------------------------------------------------------------------------------