Qlogic 3200 Series User Manual - page 247
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 B
9-61
Set Secondary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration
Information
From the BIOS/UEFI Settings Menu, select the Set Secondary Boot Target
Information option to set the secondary boot target. For example:
Target ID: 2 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 2
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk0
Alias:
State: Session Active
Target ID: 3 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk1
Alias:
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk2
Alias:
State: Session Active
Target ID: 6 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 6
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk4
Alias:
State: Session Active
Enter a Target ID:3
Enter a LUN Number[0,(default 0)]:
Clear Primary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration
Information
From the BIOS/UEFI Settings Menu, select the Clear Primary Boot Target
Information option to clear the primary boot target device.
Clear Secondary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration
Information
From the BIOS/UEFI Settings Menu, select the Clear Secondary Boot Target
Information option to clear the secondary boot target device.
Set Alternative Client ID
2. CNA iSCSI Configuration5. Boot Devices Configuration
From the BIOS/UEFI Settings Menu, select the Set Alternative Client ID option
to set an alternative client ID.