Qlogic 3200 Series User Manual - page 215
9–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
SN0054667-00 B
9-29
Delete vPorts
1. CNA FCoE Configuration4. Virtual Ports (NPIV)
From the vPorts Menu, select the Delete vPorts option to select and delete virtual
ports. For example:
Delete vPorts Menu
HBA Instance 0 (QLE8242 Port 1) : Online
WWPN: 21-00-00-0E-1E-04-95-EB
Desc: QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
1: vPort 0: WWPN: 21-DD-00-0E-1E-04-95-EB Online [ ]
2: Select All
3: Proceed
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Delete vPorts Menu
HBA Instance 0 (QLE8242 Port 1) : Online
WWPN: 21-00-00-0E-1E-04-95-EB
Desc: QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
1: vPort 0: WWPN: 21-DD-00-0E-1E-04-95-EB Online [x]
2: Deselect All
3: Proceed
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 3
Configuration changed, 1 vPort(s) of HBA instance 0 - QLE8242 have been deleted.
Driver Parameters
2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration5. Driver Parameters
From the Converged Network Adapter (CNA) FCoE Configuration menu, select
the Driver Parameters option. From the port menu, select a port to open the
Driver Settings Menu with options to configure target display options and target
binding options. For example:
Converged Network Adapter (CNA) FCoE Configuration
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]