Qlogic 3200 Series User Manual - page 236
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
9-50
SN0054667-00 B
IPv6 Protocol is currently disabled.
iSNS : Disabled.
--------------------------------------------------------------------------------
Configure IP Settings
2. CNA iSCSI Configuration3. Port IP Settings
Select the Configure IP Settings option to configure the IPV4 or IPV6 address,
gateway, and subnet mask. For example:
Enable IPv4 [on] :
DHCP to obtain IPv4 Network Information: [off] :
IP_Address [192.168.1.45] :
IP_Subnet_Mask [255.255.255.0] :
IP_Gateway [0.0.0.0] :
Enable IPv6 [off] :
Save changes and reset HBA
2. CNA iSCSI Configuration3. Port IP Settings
Select the Save changes and reset HBA option to save changes and reset the
adapter.
Refresh
2. CNA iSCSI Configuration3. Port IP Settings
Select the Refresh option to refresh the adapter data.
Target Configuration
2. Adapter Configuration1. CNA Configuration2. CNA iSCSI Configuration4. Target Configuration
From the Converged Network Adapter (CNA) iSCSI Configuration menu, select
the Target Configuration option. Select a port from the port menu to open the
Target Configuration menu with options to manage targets. For example:
Converged Network Adapter (CNA) iSCSI Configuration
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Target Configuration