Qlogic 3200 Series User Manual - page 246
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
9-60
SN0054667-00 B
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display BIOS/UEFI Information
2: Set BIOS/UEFI Mode
3: Set Primary Boot Target Information
4: Set Secondary Boot Target Information
5: Clear Primary Boot Target Information
6: Clear Secondary Boot Target Information
7: Set Alternatve Client ID
8: Save changes
9: Save changes and reset HBA (if necessary)
Display BIOS/UEFI Information
2. CNA iSCSI Configuration5. Boot Devices Configuration
From the BIOS/UEFI Settings Menu, select the Display BIOS/UEFI Information
option to view BIOS/UEFI information.
Set BIOS/UEFI Mode
2. CNA iSCSI Configuration5. Boot Devices Configuration
From the BIOS/UEFI Settings Menu, select the Set BIOS/UEFI Mode option to
set the BIOS/UEFI mode.
Set Primary Boot Target Information
2. CNA iSCSI Configuration5. Boot Devices Configuration
From the BIOS/UEFI Settings Menu, select the Set Primary Boot Target
Information option to set the primary boot target. For example:
Target ID: 2 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 2
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk0
Alias:
State: Session Active
Target ID: 3 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk1
Alias:
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk2
Alias:
State: Session Active
Target ID: 6 hba_no: 1 IP: 192.168.30.85 Port: 3260 TGT Instance #: 6
ISCSI Name: iqn.2010-03.com.apps4085:storage.disk4
Alias:
State: Session Active
Enter a Target ID:2
Enter a LUN Number[0,(default 0)]: