Qlogic 3200 Series User Manual - page 254
9–Converged Network Adapter Interactive Commands
CNA NIC Configuration
9-68
SN0054667-00 B
MAC Address : 00:0e:1e:04:95:ec
MTU : 1514
IPv4 Address : 169.254.96.35
Subnet Mask :
IPv6 Address : fe80::7813:c633:a75:6023
Link Status : Down
Updating parameters ... Plese wait ...
Configurable Properties:
========================
IFP_Jumbo_Packet_Size : 1514
IFP_LSO_IPv4_V1 : Enabled
IFP_LSO_IPv4_V2 : Enabled
IFP_LSO_IPv6_V2 : Enabled
IFP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_UDP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_TCP_Checksum_Offload_IPv4 : RX and TX Enabled
IFP_UDP_Checksum_Offload_IPv6 : RX and TX Enabled
IFP_TCP_Checksum_Offload_IPv6 : RX and TX Enabled
IFP_Large_RECV_Offload : Enabled
IFP_RSS : Enabled
User_Assigned_Name :
Add VLAN to Port or Team
3. CNA NIC Configuration3. VLAN Configuration3. Add VLAN to Port or Team
From the Configure VLANs Menu, select the Add VLAN to Port or Team option
to add a VLAN. For example:
VLAN List:
ListIndex: 1 CNA: 1 CNA Port: 2 VLAN ID: None MAC: 00:0e:1e:04:95:ec
Description: QLogic Dual Port 10 Giga
bit Ethernet CNA, PCIe 2.0 Adapter #2
ListIndex: 2 CNA: 1 CNA Port: 1 VLAN ID: None MAC: 00:0e:1e:04:95:e8
Description: QLogic Dual Port 10 Giga
bit Ethernet CNA, PCIe 2.0 Adapter
Select one or more ListIndices from the list (1,2): 1
Enter one or more VLAN ID(s) (1..4094) : 300
About to set VLAN ID(s): for ListIndex: 1
Successfully set VLAN ID(s).
Refreshing CNA data ...
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ...
Reset to 1. CNA (Physical MAC=00:0e:1e:04:95:ec)
Done.