Qlogic 3200 Series User Manual - Nic Interactive Commands
SN0054667-00 B
7-1
7
NIC Interactive Commands
This section describes the interactive mode command line options for Intelligent
Ethernet Adapters. The interactive mode uses a series of menus from which you
select the option you want and enter the number for that option. For information
on non-interactive mode operation—in which you simply enter a one- or two-letter
code to perform operations on the adapter refer to
Section 4
,
NIC Noninteractive
Commands
.
This section uses a “breadcrumbs” line following most subsection headings that
shows how to access that option; that is, it shows the hierarchical path from the
top level to the command under discussion. For example, to reach the Flash
Update option for Converged Network Adapters from the Main Menu, select
option 3 to choose Adapter Updates, 1 to select the Converged Network
Adapter type,and then 1 to see the Flash Update option. The following shows
the breadcrumbs example:
3. Adapter Updates1. Converged Network Adapter1. Flash Update
The Main Menu is as follows:
Main Menu
1: Adapter Information
2: Adapter Configuration
3: Adapter Updates
4: Adapter Diagnostics
5: Adapter Statistics
6: Refresh
7: Help
8: Exit
Please Enter Selection: