Qlogic 3200 Series User Manual - page 217
9–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
SN0054667-00 B
9-31
Bind by Port ID
1. CNA FCoE Configuration5. Driver Parameters
From the Drive Settings Menu, select the Bind by Port ID option to configure the
CLI to bind target devices by port ID. This setting affects the
Bind Target(s)
option (1. CNA FCoE Configuration2. Target Persistent Binding2. Bind
Target(s)). You must select the
Commit Changes
option to save changes to this
option.
Commit Changes
1. CNA FCoE Configuration5. Driver Parameters
From the Drive Settings Menu, select the Commit Changes option to save and
activate target binding changes. For example:
Warning:
You have requested to commit driver setting changes
of the adapter. All adapters dependant on the same
driver will be affected by the change.
Do you want to proceed with the operation?
1: Yes
2: No
Selective LUNs
2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration6. Selective LUNs
From the Converged Network Adapter (CNA) FCoE Configuration menu, select
the Selective LUNs option to configure selective LUNs. From the port menu,
select a port to open the Selective LUNS Menu with options to view the LUN
configuration and configure LUNs. For example:
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Selective LUNs Menu
=======================================================