Qlogic 3200 Series User Manual - page 216
9–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
9-30
SN0054667-00 B
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Driver Settings Menu
-----------------------
Target: Display Options
-----------------------
1: Present persistently bound target(s) plus
any new target(s) with driver default (Current)
2: Present persistently bound target(s) Only
-----------------------
Target: Binding Options
-----------------------
3: Bind by World Wide Port Name (Current)
4: Bind by Port ID
5: Commit Changes
Present persistently bound target(s) plus any new target(s) with driver defaults
1. CNA FCoE Configuration5. Driver Parameters
new targets with driver defaults
From the Drive Settings Menu, select this option to view persistently bound target
devices and new target devices with driver defaults. This setting affects the output
from the
Display Configuration
option (1. CNA FCoE Configuration2. Target
Persistent Binding1. Display Configuration). You must select the
Commit
Changes
option to save changes to this option.
Present persistently bound target(s) only
1. CNA FCoE Configuration5. Driver Parameters
From the Drive Settings Menu, select this option to view persistently bound target
devices only. This setting affects the output from the
Display Configuration
option (1. CNA FCoE Configuration2. Target Persistent Binding1. Display
Configuration). You must select the
Commit Changes
option to save changes to
this option.
Bind by World Wide Port Name
1. CNA FCoE Configuration5. Driver Parameters
From the Drive Settings Menu, select the Bind by World Wide Port Name option
to configure the CLI to bind ports by WWPN. This setting affects the
Bind
Target(s)
option (1. CNA FCoE Configuration2. Target Persistent Binding2.
Bind Target(s)). You must select the
Commit Changes
option to save changes to
this option.