Qlogic 3200 Series User Manual - -Gcr
6–iSCSI Noninteractive Commands
-g (Display General System Information)
SN0054667-00 B
6-11
-g
(Display General System Information)
To view general system information, issue the -g command as follows:
-g
QConvergeConsole CLI shows the following:
Host name
Host version
Host type
User type
-gcr
(Retrieve FW Crash Record)
To get crash record information for the specified adapter port, issue the -gcr
command as follows:
-gcr <hba_port_inst> <Crash Output File>
-h
(Help)
To view the QConvergeConsole CLI help file, issue the -h command as follows:
-h
For convenience, you can send the output to a file for easier viewing or printing as
follows:
qaucli -pr iscsi –h >file.txt
-i
(List All QLogic iSCSI HBA Ports Detected)
Use the -i command to view a list of all detected adapter port instances (“ports”)
in the system. Each port instance (hba_port_inst) is identified by its number.
To view general adapter information, issue the -i command as follows:
-i [hba_port_inst]
When you use hba_port_inst, information for only that adapter port instance is
shown. When you do not use hba_port_inst, information for all ports in the
system is shown.
The following adapter (port) information is shown:
Item number (order in which ports were detected)
Adapter number, that is, the number of this adapter in the detection process
Adapter port number (0 or 1) for this adapter
Port instance number in the system (two-port adapters appear twice)