Qlogic 3200 Series User Manual - page 239
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 B
9-53
TGTISCSIO_Initial_R2T [off] :
TGTISCSIO_CHAP_Authentication [off] :
TGTISCSIO_Bidi_CHAP_Authentication [on] :
TGTISCSIO_Snack [off] :
TGTISCSIO_Discovery_Logout [on] :
TGTISCSIO_Strict_Login [off] :
TGT_KeepAliveTimeout [30] :
TGT_DefaultTimeout [2] :
TGT_MaxBurstLen [512] :
TGT_MaxOutstandingR2T [1] :
TGT_Port [3260] :
TGTTCPO_Nagle [off] :
TGTTCPO_Timestamp [on] :
TGT_TaskManagementTimeout [10] :
TGT_InitiatorSessID [0x000e1e0495ea] :
TGT_TargetIPAddress [0.0.0.0] :
TGT_Window_Scale_Enable [on] :
TGT_Rx_Window_Scale [0] :
TGT_Type_of_Service [0] :
TGT_4022_Deleyed_ACK [off] :
Add A Target
2. CNA iSCSI Configuration4. Target Configuration
Select the Add A Target option to add a target device. For example:
IPv6 Target? [off]:
TGT_iSCSI_Name [] :iqn.1992-04.com.emc:cx.apm00103600607.b2
TGT_Port [3260] :
TGT_TargetIPAddress [0.0.0.0] :192.168.1.11
Disable a Target
2. CNA iSCSI Configuration4. Target Configuration
Select the Disable A Target option to disable a target device. For example:
Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.1.10 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.a2
Alias:0607.a2
State: Session Active
Enter a Target ID:3
Target disable complete.