Qlogic 3200 Series User Manual - page 74
5–Fibre Channel Noninteractive Commands
Command Format
5-4
SN0054667-00 B
You can combine the commands -o, -s and -x with other options. However, they
must be at the beginning or at the end of the command line. Use these commands
as follows:
-o
= Output the results to a file (see
“-o (Output to a File)” on page 5-28
).
For example:
# qaucli -pr fc -l -o
-s
= Silent mode (see
“-s (Silent Mode)” on page 5-33
). For example:
# qaucli -pr fc -i all -s -o output.txt
-x
= Outputs the results in XML format (see
“-x (Output in XML Format 1)”
on page 5-37
). For example:
# qaucli -pr fc -i all -x -o output.xml
You cannotcombine the command -f with any other options:
-f
= Input Parameter Options from a Text File (see
“-f (Input Parameter
Options from a Text File)” on page 5-11
). For example:
# qaucli -pr fc -f command.txt
In addition, the following general rules for commands apply:
Only one command line option per input file is valid.
You can use either the hyphen (-) character or the forward slash (/)
character. For example, both of these commands are valid:
qaucli -pr fc -g
qaucli -pr fc /g
Table 5-2
defines the command variables.
.
Table 5-2. Command Variables
Variable
Definition
Format
<
hba instance>
Adapter number
a
<hba wwpn>
Adapter world wide port
name
xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
<
alias>
Adapter alias
Symbolic adapter
b
name
<
target wwnn>
Target world wide node
name
xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
<
target wwpn>
Target world wide port
name
xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx