Qlogic 3200 Series User Manual - page 242
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
9-56
SN0054667-00 B
Add a CHAP entry Select this option to add a CHAP entry. For example:
CHAPName [] :chap_target1
CHAPSecret [] :q1w2e3r4t5y6
Set CHAP as Bidi entry [off] :
Add a Default BIDI CHAP Select this option to add a bidirectional secret to a
CHAP entry. For example:
CHAPSecret [] :abcdefghijklmnop
Edit a CHAP entry Select this option to edit a CHAP entry.
Delete a CHAP entry Select this option to delete a CHAP entry. For example:
CHAP TABLE
Entry: 1
Name: qlogic
Secret: qle82xx55
Entry: 2
Name: abcd
Secret: 1234567890asdfghjk
This is a BIDI Chap Entry
CHAP Entry Number : 2
Save changes and reset HBA Select this option to save changes and reset the
adapter.
Refresh Select this option to refresh the adapter data.
Target Discovery Menu
2. CNA iSCSI Configuration4. Target Configuration
Select the Target Discovery Menu option to open the Target Discovery Menu
with options to display targets, add a send target, mark a send target for
rediscovery, remove targets, log in to a target and make it persistent, duplicate
targets, view and configure iSNS settings, save changes, and refresh the adapter
data. For example:
Target Discovery Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display Send Targets
2: Display Discovered Targets
3: Add a Send Target