Qlogic 3200 Series User Manual - page 78
5–Fibre Channel Noninteractive Commands
-cna (FCoE Utilities Menu for QLx81xx Adapters)
5-8
SN0054667-00 B
To view general information for the adapter, issue the following command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --geninfo
To view data center bridging exchange protocol settings, issue the following
command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --dcb --info
To update the message passing interface (MPI) configuration table on the adapter
from a file, issue the following command:
qaucli -pr fc -cna
file>
To save the current MPI configuration table of the selected adapter to a file, issue
the following command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --savecfg <mpi file>
To view DCBX Type-Length-Value (TLV) data sent and received over the adapter
port connection, issue the following command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --tlv --detail | --raw
To view data center Ethernet (DCE™) network activity information sent and
received over the adapter port connection, issue the following command:
qaucli -pr fc -cna <hba instance>|<hba wwpn> --mon --dce [ { <param
name> | <param alias> <param value> } ]
Table 5-3
lists the DCE statistics parameters, possible values, and a description of
each.
Table 5-3. DCE Statistics Parameters
Parameter
Name
Parameter
Alias
Parameter
Value
Description
AutoPoll
AP
0
1–256
Set to auto polling mode
Set to manual polling mode (iteration)
SetRate
SR
5–30
Set the polling interval rate (seconds)
Details
DT
0–2
Set the detailed display mode:
0 = Absolute
1 = Rate per second
2 = Baseline