Qlogic 3200 Series User Manual - page 243
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 B
9-57
4: Mark Send Target for re-discovery
5: Remove a Send Target
6: Login and persist a discovered target
7: Duplicate a Persistent Target
8: Duplicate a Discovered Target
9: Remove Discovered Target
10: Display iSNS Settings
11: Configure iSNS
12: Save changes and reset HBA (if necessary)
13: Refresh
Display Send Targets Select this option to view the persistent send target list.
For example:
--------------------------------------------------------------------------------
Persistent Send Target List
------------------------------
1. hba_no: 1 IP: 192.168.30.85
--------------------------------------------------------------------------------
Display Discovered Targets Select this option to view discovered target
devices. For example:
--------------------------------------------------------------------------------
Persistent Target List
---------------------------------
1. Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2 ISID: 000e1e045242
State: Session Active
2. Target ID: 4 hba_no: 1 IP: 192.168.1.10 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.a2
Alias: 0607.a2 ISID: 000e1e045242
State: Session Active
--------------------------------------------------------------------------------