Qlogic 3200 Series User Manual - page 272
9–Converged Network Adapter Interactive Commands
Loopback Test
9-86
SN0054667-00 B
Configure Test Parameters
6. Loopback Test
From the Loopback Test menu, select the Configure Test Parameters option to
open a loopback test submenu with options to configure the data patterns, data
size, number of tests, test increments, error handling, and loopback type. For
details about these parameters, refer to
Table 5-6
.
For example:
Loopback Test
=======================================================
CNA : 1 Port: 2
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EF
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EF
WWNN : 20-00-00-0E-1E-04-95-EF
Link : SFP not installed
=======================================================
1: Data Patterns
2: Data Size
3: Number Of Test(s)
4: Test Increment(s)
5: Abort On Error
6: Loopback Type
Start Diagnostics Test
6. Loopback Test
From the Loopback Test menu, select the Start Diagnostics Test option to start
the loopback test.
iSCSI
4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model6. Loopback Test
This option is currently not supported.