Qlogic 3200 Series User Manual - page 245
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 B
9-59
2. IPv6 Address: ::
Select 1 or 2 : 1
iSNS IPv4 Address [0.0.0.0]: 10.10.10.10
iSNS Port Number [3205]:
Save changes and reset HBA Select this option to save changes and reset the
adapter.
Refresh Select this option to refresh the adapter data.
List LUN information
2. CNA iSCSI Configuration4. Target Configuration
Select the List LUN information option to view LUN information for persistent
and dynamic targets. For example:
Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2
State: Session Active
No dynamic targets to display.
Save Target/CHAP Changes
2. CNA iSCSI Configuration4. Target Configuration
Select the Save Target/CHAP Changes option to save target and CHAP
changes.
Refresh
2. CNA iSCSI Configuration4. Target Configuration
Select the Refresh option to refresh the adapter data.
Boot Devices Configuration
2. Adapter Configuration1. CNA Configuration2. CNA iSCSI Configuration5. Boot Devices Configuration
From the Converged Network Adapter (CNA) iSCSI Configuration menu, select
the Boot Devices Configuration option. Select a port from the port menu to open
the BIOS/UEFI Settings menu with options to display BIOS/UEFI information, set
the BIOS/UEFI mode, set primary and secondary boot target information, clear
primary and secondary boot target information, set the alternative client ID, save
changes, and reset the adapter. For example:
BIOS/UEFI Settings Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31