Qlogic 3200 Series User Manual - page 205
9–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
SN0054667-00 B
9-19
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
HBA Parameters Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version : 4.07.31
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Display HBA Parameters
2: Configure HBA Parameters
3: Restore Defaults
Display HBA Parameters
From the HBA Parameters menu, select the Display HBA Parameters option to
view adapter parameters. For example:
--------------------------------------------------------------------------------
HBA Instance 0: QLE8242 Port 1 WWPN 21-00-00-0E-1E-04-95-EB PortID 11-00-20
--------------------------------------------------------------------------------
Connection Options : 1 - Point-to-Point Only
Data Rate : 10 Gbps
Frame Size : 2048
Hard Loop ID : 0
Loop Reset Delay (seconds) : 5
Enable Host HBA BIOS : Enabled
Enable Hard Loop ID : Disabled
Enable FC Tape Support : Enabled
Execution Throttle : 65535
Login Retry Count : 8
Port Down Retry Count : 30
Enable LIP Full Login : Enabled
Link Down Timeout (seconds) : 30
Enable Target Reset : Enabled
LUNs Per Target : 128
Out Of Order Frame Assembly : Disabled
Configure HBA Parameters
From the HBA Parameters menu, select the Configure HBA Parameters option
to open the Configure Parameters Menu. Select the parameter option and change