Qlogic 3200 Series User Manual - -Netconf6
6–iSCSI Noninteractive Commands
-netconf6 (Configure IPv6 Settings)
SN0054667-00 B
6-19
Setting the IP address, subnet mask, or gateway turns off DHCP address
resolution for the IP configuration, if it is on.
-netconf6
(Configure IPv6 Settings)
To manually configure the IPv6 network settings, issue the -netconf6 command
as follows:
-netconf6 <hba_port_inst> [-IP <IPv6 Address>] [-IPNM <Subnet
Mask> ] [-IPGW <Gateway Address>]
Where [option]includes the following:
Setting the IP address, subnet mask, or gateway turns off DHCP address
resolution for the IP configuration, if it is on. Some examples of usage follow.
IP
= Set the IP address of the adapter
-IPNM Mask> = Set the subnet mask of the adapter -IPGW Address> = Set the gateway -DISN4 = Disable IPv4 network setup a a Mutually exclusive with the other IPv4 commands -IPV4DHCP = Set DHCP on b b Mutually exclusive with -IP/-IPNM/IPGW -IP = Set IP address -IPNM = Set IP netmask -IPGW = Set IP gateway -DISN6 = Disable IPv6 network setup c c Mutually exclusive with -IPLLA/-IPLL -IPLLA = Set local link address automatically d d Manual or automatic—mutually exclusive -IPLL = Set local link address manually d -IPR01A = Set IPR0 and IPR1 automatically e e Manual or automatic—mutually exclusive -IPR0 = Set routable address 0 manually e -IPR1 = Set routable address 1 manually e -IPRRA = Set router address automatically f f Manual or automatic—mutually exclusive -IPRR = Set router address manually f