Qlogic 3200 Series User Manual - -Nc
6–iSCSI Noninteractive Commands
-nc (Display Neighbor Cache)
6-18
SN0054667-00 B
-nc
(Display Neighbor Cache)
To display the neighbor cache (IPv6 only), issue the -nc command as follows:
-nc <hba_port_inst>
-netconf
(Configure IPv6 Settings)
To configure the network settings, issue the -netconf command as follows:
-netconf <hba_port_inst> [-IP <IP Address>] [-IPNM <Subnet Mask>]
[-IPGW <Gateway IP Address>]
Where:
TCP Options
TCP_Auto_Discovery
SLPADIS
on or off
TCP_DHCP
TCPDHCP
on or off
TCP_Nagle
TCPN
on or off
TCPMaxWindowSize
TCPMWS
1000h–FFFFh
TCP_Time_Stamp
TCPTMS
on or off
Miscellaneous Options
KeepAliveTO
KATO
0–65535
Large_Frames
LRGFRM
on or off
a
MaxBurstLen
MBL
0–65535
MaxOutstandingR2T
MOR2T
0–65535
a
Not for QLA4010
IP
= Set the IP address of the adapter
IPNM
= Set the subnet mask of the adapter
-IPGW
= Set the gateway
-DISN4
= Disable IPv4 network setup
-IPv4DHCP
= Set DHCP on
Table 6-3. Adapter Parameters (Continued)
Configuration Name
Configuration Alias
Value