Qlogic 3200 Series User Manual - Iscsi Noninteractive
Manual is about: QConvergeConsole CLI
of
300
SN0054667-00 B
6-1
6
iSCSI Noninteractive
Commands
This chapter describes the noninteractive iSCSI command format and parameters
of QConvergeConsole CLI for the QLogic 8242 Converged Network Adapter.
Command Format
The noninteractive iSCSI command format is as follows:
qaucli -pr iscsi [optional parameters] <Command Option> [Command
Variable] | [Command Variable]
Where:
Table 6-1
defines the command variables.
NOTE:
To view help, enter the command -h.
<> = Parameters in angled brackets are required.
[] = Parameters in square brackets are optional.
| = OR operator.
Italicized text = Placeholder describing the command variable.
Table 6-1. Noninteractive Command Variables
Variable
Definition
hba_port_inst
System port
Target ID
Target ID
LUN ID
Logical unit number (0–255)