Qlogic 3200 Series User Manual - -Ping
6–iSCSI Noninteractive Commands
-ping (Ping Target)
6-22
SN0054667-00 B
-ping
(Ping Target)
To ping the target device, issue the -ping command as follows:
-ping <hba_port_inst> <IP Address> <Ping Count> <Packet size>
<IPv6 source address>
The following provides the IPv6 source address
values:
Where:
-ps
To view persistent targets for the adapter port, issue the -ps command as follows:
-ps <hba_port_inst> [Target ID]
If you do not specify the [Target ID], QConvergeConsole CLI lists all targets
for the specified adapter port number. If you do not specify the port instance
[hba_port_inst]
or the target ID, [Target ID],
QConvergeConsole CLI lists
all target IDs for all adapter ports in the system.
-pu
To unbind a persistent target, issue the -pu command as follows:
-pu <hba_port_inst> <Target ID>
-px
To unbind all persistent targets on the adapter, issue the -px command as
follows:
-px <hba_port_inst>
0 = Do not care
1 = Local link
2 = Address 0
3 = Address 1
hba_port_inst = The adapter port that sends the ping
IP Address = The IP address to ping
Ping Count = The number of ping packets you want (1–[2
31
]).
Packet Size = The size of the ping packet 0–64kB
IPv6 Source Address = Origin device