Qlogic 3200 Series User Manual - page 252
9–Converged Network Adapter Interactive Commands
CNA NIC Configuration
9-66
SN0054667-00 B
IPv6_Large_Send_Offload_v2_Enable (on, off)[on]:
Receive_Side_Scaling_Enable (on, off)[on]:
Jumbo_Frames_MTU_9000_Enable (on, off)[off]:
LOCAL_Administered_Address_MAC [00:0e:1e:04:95:ec]:
WOL available options:
0 = Disabled,
1 = Wake on Magic Frame,
Port_Wake_On_LAN_Option [Disabled]:
Port_PXE_Enable (on, off)[off]:
VLAN_ID (1..4094) [0]:
Large_Receive_Offload (on, off)[on]:
Priority_Tagging (off, Rx, Tx, RxTx)[Rx Tx Enabled]:
Flow_Control (off, Rx, Tx, RxTx)[Rx Tx Enabled]:
Vlan_Tagging (on, off)[on]:
Receive_Side_Scaling_Ring (1 .. 4)[2]:
Health_Monitoring (on, off)[on]:
Max_Jumbo_Buffers (1024, 2048, 4096, 8192)[4096]:
Receive_Buffer_Size (1024, 2048, 4096, 8192, 16384, 32768)[16384]:
Transmit_Buffer_Size (1024, 2048, 4096)[1024]:
Completion_Queue_Size (1024, 2048, 4096, 8192, 16384, 32768)[16384]:
Interrupt_Moderation (on, off)[off]:
Change Port Alias Name
3. CNA NIC Configuration2. NIC Port Setting Configuration
Select the Change Port Alias Name option to change the port alias. For example:
Port_Alias [None]: Alias2
Successfully saved Port Alias
Change MAC Alias Name
3. CNA NIC Configuration2. NIC Port Setting Configuration
Select the Change MAC Alias Name option to change the port MAC alias. For
example:
Physical MAC Address : 00:0e:1e:04:95:ec
Enter Port_Physical_MAC_Alias [None]: alias_mac
Successfully saved MAC Alias
Active/LAA MAC Address : 00:0e:1e:04:95:ec
Enter Port_LAA_MAC_Alias [None]: alias_laa
Successfully saved MAC Alias
Save Port Configuration
3. CNA NIC Configuration2. NIC Port Setting Configuration
Select the Save Port Configuration option to save the port configuration. For
example:
Only save parameters that were modified? (yes, no) [yes]: y
About to save configured values ... Please wait ...