Oki ES4192dn User Manual - page 1019
Registering a Destination (Profile) from the Operator Panel
This section describes how to register profiles from the operator panel.
1.
Press [Device Settings] on the touch panel.
2.
Press [Profile].
3.
Select a number, and then press [Register].
4.
Enter a profile name, and then press [Next].
5.
Select a setting, and then press [Next].
6.
Enter the values of the transmission destination computer name and the shared folder name in the "
the transmission destination computer name the shared folder name" format.
Example: PC1 share
Memo
If there is no DNS server in the network, you cannot specify the computer with the computer name (the transmission
destination computer name). In such a case, use the IP address of the computer to set.
Example: 192.168.0.3 share
To enter " " using the QWERTY keyboard, press the
7.
Press [Next].
8.
If access privileges are set to the shared folder, enter the user name and password in [User Name]
and [Password].
Note
If domain management is performed, enter "User name@domain name".
If domain management is performed and you cannot establish a connection even after entering "User name@domain name",
delete "@domain name".
Also, access the Web page of this machine, select [Admin Setup] > [Network Menu], and then set the NetBIOS domain
name in [Workgroup name] in [NBT].
For the domain name, check with your network administrator.
9.
Press [Next].
10.
Set other items if necessary.
11.
Press [OK].
1018