Oki ES4192dn User Manual - page 55
Setting Margins (Margin)
Copying with Margins on One Side
Copying with Margins on Both Sides
The margin function enables you to set margins. This function is useful when you want to staple or punch holes in copies. You can set
the top, bottom, right, and left margins by specifying the [Top] and [Left] values.
For portrait printing
Specifying the left margin is suitable for long edge binding printing.
Specifying the top margin is suitable for short edge binding printing.
For landscape printing
Specifying the left margin is suitable for short edge binding printing.
Specifying the top margin is suitable for long edge binding printing.
Note
A part of a document may not be copied.
The specified margin values stay the same even after you change the zoom rate.
To copy a document in your preferred orientation, specify the orientation in [Direction] in advance.
Changing the Document Orientation (Direction)
Memo
If all the values are set to [0], [Margin] is disabled.
You can set [Margin] as default so that you do not have to set margins every time you make copies.
The value of the margin can be changed from [Device Settings] > [Admin Setup] > [Copy Setup] > [Default Settings] > [Margin].
Copying with Margins on One Side
Set margins to a simplex document before copying.
You can also set the [Direction] setting at the same time, which is useful if it is used in combination with this function.
Changing the Document Orientation (Direction)
1.
Press [Copy] or the
(COPY) button.
The touch panel display switches to the copy top screen.
54