Oki ES4192dn User Manual - page 933
Registering from the Operator Panel
You can register and edit the e-mail address of the machine and server information with the operator panel on the machine. When
registering and editing the server information, the content in the setting information sheet is required.
Set the reception method for the machine to receive e-mails. If you want to receive and print e-mail attachment files that are sent to
the machine, select [POP3] or [SMTP] to suit your e-mail setting environment. If you do not want to receive e-mails, select [Disable].
Note
If you use a free mail server or any mail server other than that is provided by your Internet service provider, You cannot set with Easy
Setup.
If you touch [Device Settings], and then select [Admin Setup] > [Network Menu] > [Mail Server Setup], the detailed mail server
settings are displayed on the screen where you can perform the setting.
Memo
The setting information is provided from your provider when you make a contract. If you do not have the setting information,
check with your provider or network administrator.
If you do not have any e-mail address that this machine uses, obtain the e-mail address by making a contract with a provider or
using other ways.
Setting the Reception Protocol to [POP3]
Setting the Reception Protocol to [SMTP]
Setting the Reception Protocol to [Disable]
932