Oki ES4192dn User Manual - page 660
Copy Setup
You can set the initial values of the copy functions.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Copy Setup].
6.
Select an item, and then change the setting.
Press [OK] by following the on-screen instructions if necessary.
7.
Press [Back] until the home screen is displayed.
Item
Factory default
setting
Description
Default
Settings
Scan Size
A4 or Letter
Sets the default scan size.
Duplex Copy
OFF(Simplex)
Sets the default setting of whether to turn duplex copying on or off, and
the default binding position.
Zoom
100%
Sets the default zoom rate.
Sort
ON
Sets whether to collate copied documents by default.
Image
Settings
Density
0
Sets the default density.
Document
Type
Text&Photo
Sets the default image quality.
Resolution
High Speed
Sets the default resolution.
Background
Removal
Auto
Sets the default background removal.
Contrast
0
Sets the default contrast.
Direction
Portrait
Selects the default page orientation of documents.
ID Card Copy
OFF
Sets whether to use the ID card copy mode by default.
Continuous Scan
OFF
Sets whether to use Continuous Scan mode.
Mixed Size
OFF
Sets whether different sized documents are copied on each size paper by
default.
Margin
Margin
OFF
Sets the default margins.
Front
Left
0 mm (0 inch)
Available range: 0 to ±25 mm (0.0 to 1.0 inch) (1 mm increment)
Top
Back
Left
Top
Edge
Erase
Setting
ON
Sets whether to erase the shade created in the surrounding of 2-page
spread documents by default.
Width
2 mm
(0.1 inch)
Sets an erasing width.
Available range: 2 to ±25 mm (0.1 to 1.0 inch) (1 mm increment)
Configure Shortcuts
01: Scan Size
02: Paper Feed
03: Duplex Copy
04: N-in-1
05: Zoom
06: Direction
Sets the shortcut button for the [Copy] tab.
659