Oki ES4192dn User Manual - page 653
Easy Setup
In [Easy Setup], you can change the settings of date/time, fax, network, e-mail function by using [Device Settings] on the operator
panel.
1.
Press [Device Settings] on the touch panel.
2.
Press [Easy Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Select an item, and then change the setting.
When the setting is complete, the setting completion screen is displayed.
6.
Press [Close] to complete the setup.
Item
Description
Date/Time
Setting
Time Zone
Sets the GMT time zone.
Daylight Saving
Sets daylight saving to ON or OFF.
Server SNTP Server
(Primary)
Sets the SNTP server to use for setting the current date and time. You can enter up to
64 characters.
SNTP Server
(Secondary)
Manual Date
Sets the current date and time manually.
Time
Fax Setting
Fax Number
Sets the fax number of this machine. You can enter up to 40 digits.
Sender ID
Sets the sender's information. You can enter up to 22 characters.
Network
Setting
IP Address
Sets the IP address. You can enter up to 15 characters.
Subnet Mask
Sets the subnet mask. You can enter up to 15 characters.
Default Gateway
Sets the gateway address. You can enter up to 15 characters.
DNS Server (Primary)
Sets the IP address for a Primary DNS server. You can enter up to 15 characters.
DNS Server (Secondary)
Sets the IP address for a Secondary DNS server. You can enter up to 15 characters.
WINS Server (Primary)
Sets the name or the IP address for the WINS server. You can enter up to
15 characters.
WINS Server (Secondary)
Sets the name or the IP address for the WINS server. You can enter up to
15 characters.
E-mail Setting
Mail Server Address
Sets the IP address or host name for the SMTP server. You can enter up to
64 characters.
Set Sender's Address (from)
Sets an e-mail address for this machine.
Receive Setting
Sets the protocol to be used for receiving e-mails.
Authentication Method
Sets the authentication method.
SMTP User ID
Sets the login ID to the server used for SMTP authentication. You can enter up to
64 characters.
SMTP Password
Sets the password to the server used for SMTP authentication. You can enter up to
64 characters.
POP3 Server
Sets the IP address or host name for the POP3 server. You can enter up to
64 characters.
POP User ID
Sets the login ID to the server used for POP authentication. You can enter up to
64 characters.
POP Password
Sets the password to the server used for POP authentication. You can enter up to
16 characters.
652