Oki ES4192dn User Manual - page 676
Display condition: TCP/IP is enabled.
Network Scale
Normal
[Normal]: The machine operates effectively even if
connected to a HUB with the spanning tree function.
However, the machine takes longer to start up if it is
connected to a small LAN that consists of two or three
computers.
[Small]: This setting covers a small LAN that consists of
two or three computers to a large LAN, but the machine
may not operate efficiently if it is connected to a HUB
with the spanning tree function.
Gigabit Network
Disable
Sets whether to enable access with Gigabit Ethernet.
HUB Link Setting
Auto
Sets the hub linking method. Normally, select [Auto
Negotiate].
Wireless
Setting
Automatic Setup
(WPS)
WPS-PBC -
WPS-PBC is executed.
WPS-PIN
-
WPS-PIN is executed.
Wireless
Network
Selection
A list of access
point name found
in the search
-
Displays a list of wireless LAN access points' names that
are found in a search.
Manual
Setup
SSID
(NULL)
Enter an SSID.
Security
Disable
Selects the security of the wireless LAN function.
"WPA2-EAP" can set only in Web.
WPA
Encryption
Type
AES
Select a WPA2-PSK encryption type.
Displays if [WPA2-PSK] is selected for [Security].
WPA Pre-
shared
Key
(NULL)
Enter the Pre-shared Key.
Displays if [WPA2-PSK] is selected for [Security].
Wireless reconnection
-
Wireless reconnection is executed.
Enabling Wired Communications
-
Switch wireless network connection to wired network
connection.
This item is displayed if wireless communications are
enabled.
Factory Defaults
The settings of the network, mail server, LDAP server,
and secure protocol server are returned to the default
settings.
Server
Setup
SMTP Server
(NULL)
Sets the IP address or server name for the SMTP server.
SMTP Port
25
Sets the port number for the SMTP server. Normally, use
the default setting.
Available range: 1 to 65535
SMTP Encryption
None
Selects an encryption method in the SMTP
communication.
Receive Setting
Disable
Sets the protocol to be used for receiving e-mails.
POP3 Server
(NULL)
Sets the IP address or server name for the POP3 server.
POP3 Port
110
Sets the port number prepared by POP3 on the POP3
server.
Available range: 1 to 65535
POP Encryption
None
Selects an encryption method in the POP communication.
Authentication Method
None
Selects an authentication method for e-mail
transmissions.
SMTP User ID
(NULL)
Sets the login name to the server used for SMTP
authentication.
SMTP Password
(NULL)
Sets a login password to the server used for SMTP
authentication.
POP User ID
(NULL)
Sets a login name to the server used for POP certification
or for printing received e-mail attachment files.
POP Password
(NULL)
Sets a login password to the server used for POP
certification or for printing received e-mail attachment
files.
LDAP
Server
Server Setting LDAP Server
(NULL)
Sets the IP address or server name for the LDAP server.
Port No.
389
Sets the port number for the LDAP server.
675