Oki ES4192dn User Manual - page 381
Setting a Print Method for When a Received Image Exceeds Paper Size
The excess from the specified paper is reduced or discarded, or printed on the next sheet of paper. For example, if the machine receives
a fax that is larger than A4 with A4 paper specified, the excess of the image is printed on the next sheet of paper.
You can avoid such situation by specifying a reduction ratio.
Specifying a Reduction Ratio
The reduction rate determines whether or not the machine automatically reduces the received image to the specified paper size. [Auto]
automatically reduces the image and [100%] prints the image without reduction. [Rx Reduc. Rate] is set to [Auto] by factory default.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Other Settings].
7.
Press [Rx Reduc. Rate].
8.
Select a reduction ratio.
Available value settings:
9.
Press [Back] until the home screen is displayed.
Specifying a Threshold Value
The threshold value determines whether or not to print part of the received image on the next page.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Other Settings].
7.
Press [Reduc. Margin].
380