Oki ES4192dn User Manual - page 56
2.
Set a document in the ADF or on the document glass.
3.
Press [Margin] on the [Advanced] tab.
4.
To set the left or right margin, specify a margin in [Left] of [Front] by using the 10-key pad or by
pressing , , and [+/-].
To create a margin on the left side of the output, specify a positive value.
To create a margin on the right side of the output, specify a negative value.
5.
To set the top or bottom margin, specify a margin in [Top] of [Front] by using the 10-key pad or by
pressing , , and [+/-], and then press [OK].
To create a margin at the top of the output, specify a positive value.
To create a margin at the bottom of the output, specify a negative value.
Memo
You do not need to specify the [Back] margin when copying on a single side.
If you press [Cancel], the screen returns to the previous screen without saving the changes.
6.
Press the
(START) button.
Copying starts. The progress status is displayed.
Topics
You can change other copy settings.
Changing Settings before Copying
Copying with Margins on Both Sides
When you make duplex copies with [Margin] enabled, you must specify the document direction as well as the [Back] margin.
The direction can be changed by pressing [Change].
Changing the Document Orientation (Direction)
1.
Press [Copy] or the
(COPY) button.
The touch panel display switches to the copy top screen.
55