Oki ES4192dn User Manual - page 592
Paper is not fed from
Tray 2 (optional).
Tray 2 (optional) is not set with
the printer driver.
Set Tray 2 (optional) with the printer driver.
Even after the jammed
paper was removed,
the machine does not
work.
-
Open and close the top cover.
-
Paper is curled. Paper
is creased.
The paper is damp or has a static
charge.
Use paper stored under proper temperature
and humidity conditions.
The paper is light.
Press [Device Settings], select [Paper Setup] >
[(tray name)] > [Media Weight], and then
specify a lighter weight.
The paper twists
around the rollers in
the fuser unit.
The settings of media weight and
type are incorrect.
Press [Device Settings], select [Paper Setup] >
[(tray name)] > [Media Type]/[Media Weight],
and then specify the appropriate values.
Alternatively, specify heavier weight in [Media
Weight].
The paper is light.
Use heavier paper.
-
There are nearly solid fill on the
leading edge of the paper.
Insert a margin into the leading edge of the
paper.
For duplex printing, insert a margin into the
bottom edge of the paper as well.
-
The paper is twinkled
when printing on
envelopes.
The paper is damp.
Use paper stored under proper temperature
and humidity conditions.
The machine is printing when the
temperature and humidity
conditions are high.
Set [High Humid Mode] of [User Install] to
[ON] on [Admin Setup].
If you cannot solve a problem with
the above solutions
Load the envelope with the flap (for gluing) on
the printer side, and then set the reverse page
orientation (180°) on the printing preferences.
591