Oki ES4192dn User Manual - page 673
Available range: 4.00 to 999.75 point. (0.25 point increments)
Symbol Set
PC-8
Selects a PCL symbol set.
A4 Print Width
78 Column
Sets the number of digits for automatic line feed on A4 paper.
White Page Skip
OFF
Selects whether to print blank pages.
CR Function
CR
Sets the machine operation when receiving CR code.
LF Function
LF
Sets the machine operation when receiving LF code.
Print Margin
Normal
Sets the nonprintable area of the page.
Pen Width Adjust
ON
Sets whether to emphasize thin lines so that the lines look thicker.
Tray
ID#
Tray 1
1
Sets a value that specifies a tray with the PCL paper source specification
command.
Available range: 1 to 59
Display condition for [Tray 2]: the second tray unit is installed.
Tray 2 (Optional)
5
MP Tray
4
PS Setup
L1 Tray
Type 1
Set the paper tray number for the Level 1 operator.
[Type 1]: The effective number for paper tray starts from 1.
[Type 2]: The effective number for paper tray starts from 0.
Network PS-Protocol
RAW
Specifies PS communication protocol mode of data from Network.
USB PS-Protocol
RAW
Specifies PS communication protocol mode of data from USB.
XPS Setup
DigitalSignature
OFF
Sets the DigitalSignature functions.
DiscardControl
Auto
Sets the DiscardControl function.
MC Mode
ON
Sets the MarkupComaptibility function.
Unzip Mode
Speed
Sets the XPS file decompression method.
White Page Skip
OFF
Selects whether to output blank pages in XPS.
SIDM Setup
SIDM Manual ID#
2
Sets SIDM Manual MP numbers and Tray IDs.
SIDM Manual2 ID#
3
SIDM MP Tray ID#
4
SIDM Tray1 ID#
1
SIDM Tray2 ID#
5
IBM PPR
Setup
Character Pitch
10 CPI
Specifies character pitches in IBM PPR emulation.
Font Condense
12CPI to 20CPI Specifies 12CPI pitches for Condense Mode.
Character Set
SET-2
Specifies a character set.
Symbol Set
IBM-437
Specifies a symbol set.
Letter O Style
Disable
Specifies the style that replaces 9BH with letter o and 9DH with a zero.
Zero Character
Normal
Sets the zero to be slashed or unslashed.
Line Pitch
6 LPI
Specifies the line spacing.
White Page Skip
OFF
Selects whether to print blank pages.
CR Function
CR
Selects a carriage return from [CR] or [CR+LF].
LF Function
LF
Selects a line feed from [LF] or [LF+CR].
Line Length
80 Column
Specifies the number of characters per line.
Form Length
11.7 inch or 11
inch
Specifies the length of paper.
TOF Position
0.0 inch
Specifies the distance from the top edge of paper to where the cut is to
be made.
Left Margin
0.0 inch
Specifies the distance from the left edge of paper to where the cut is to
be made.
Fit To Letter
Disable or
Enable
Sets the printing mode that can fit paper to the printable area
equivalent to 11 inches (66 lines).
Text Height
Same
Sets the height of a character.
SAME: The height stays the same regardless of CPI.
DIFF: The height varies according to CPI.
EPSON FX
Setup
Character Pitch
10 CPI
Specifies character pitches.
Character Set
SET-2
Specifies a character set.
672