Oki ES4192dn User Manual - page 398
Registering an Fcode Box
Registering a Confidential Box
Registering a Bulletin Board Box
To perform Fcode communication, register an Fcode box. There are two types of Fcode boxes: Fcode confidential boxes and Fcode
bulletin board boxes. Be sure to register a sub address and a PIN number (Fcode confidential communication only) for each Fcode box.
Registering a Confidential Box
You can register a confidential box to the machine, allowing you to receive a fax data that you do not want to expose to third persons
with Fcode communication.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Fcode Box].
7.
Press [Register] of a box number.
Memo
To edit a registered Fcode confidential box, enter the PIN number, and then select [Edit].
8.
Press [Confidential Box].
9.
Press the registration button of [Box Name].
10.
Enter a box name.
Memo
You can enter up to 16 characters.
11.
Press [OK].
12.
Press the registration button of [Sub-Address].
13.
Enter a sub address.
Memo
You can enter up to 20 characters including # or *.
397