Oki ES4192dn User Manual - page 495
IEEE802.1X
Sets EEE802.1X/EAP information.
Connecting This Machine to the Authentication Network by Using IEEE802.1X
Secure Protocol Server
Sets secure protocol server information.
Secure Protocol Server Settings (Kerberos)
LDAP
Sets LDAP information.
Security
Protocol
ON/OFF
Stops a network protocol and network service that are not used.
IP Filtering
Restricts access by using IP addresses. Access from outside your company is also supported. However,
this function requires sufficient knowledge about IP addresses. Some settings may result in serious
problems that prevent you from accessing the machine via a network.
Limiting by Using an IP Address (IP Filtering)
MAC Address
Filtering
Restricts access by using MAC addresses. Access from outside your company is also supported.
However, this function requires sufficient knowledge about MAC addresses. Some settings may result
in serious problems that prevent you from accessing the machine via a network.
About the Web Page of This Machine
Limiting by Using a MAC Address (MAC Address Filtering)
SSL/TLS
Encrypts communications between a computer (client) and the machine.
Encrypting Communication with SSL/TLS
IPSec
Sets the encryption for communications between a computer (client) and the machine, and settings to
prevent tampering.
Encrypting Communication with IPSec
Change
Network
Password
Changes the administrator password. The default value of the password is the last six digits of the
MAC address.
Changing the Administrator Password
Maintenance Reset/Restore Restarts and resets a network. Even if you access the Web page from the Web browser after
restarting, the Web page is not displayed until the restart is complete. Resetting restores the IP
address to its default status, resulting in information you manually set being lost. In such a case, the
Web page cannot be displayed.
Network Scale Improves operation efficiency on a network. This setting is very effective when a hub that has the
spanning tree function is used, or a computer and the machine are connected one-on-one with a
cross cable.
Copy Setup
You can set the image quality, density, scan size, margins, edge erase, duplex, and other settings.
Fax Setup
Item
Description
Default Settings
Sets the image quality, density, and other default settings for sending faxes.
Security Function
Sets security for sending faxes.
Other Settings
Sets other settings for sending faxes.
FaxServer Function
Item
Description
Environmental Settings
Sets the environmental settings.
Default Settings
Sets the default settings.
Security Function
Sets the security settings.
Internet Fax Setup
Sets Internet Fax.
Scanner Setup
Item
Description
Default Settings
Sets the image quality, density, and other default settings for scanning.
E-mail Setup
Sets e-mail settings that are required for performing Scan to E-mail.
USB Memory Setup
Sets USB Memory settings for performing Scan to USB Memory.
494