Oki ES4192dn User Manual - page 665
FaxServer Function
You can set the initial values of FaxServer Function.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [FaxServer Function].
6.
Select an item, and then change the setting.
Press [OK] by following the on-screen instructions if necessary.
7.
Press [Back] until the home screen is displayed.
Item
Factory default
setting
Description
Environmental
Settings
FaxServer
Function
OFF
Sets whether to use scanning to fax server.
Prefix
(NULL)
Sets to prefix code for scanning to fax server.
Suffix
@faxserver
Sets to suffix code for scanning to fax server.
Text
OFF
Sets whether to add body text.
Default Settings
Scan Size
A4 or Letter
Sets the default scan size.
Density
0
Sets the default density.
Resolution
Normal
Sets the default resolution.
Background
Removal
Auto
Sets the default setting of the background removal.
Continuous
Scan
OFF
Sets whether to use Continuous Scan mode by default.
Compression
Rate
Low
Selects the default compression level.
Configure Shortcuts
01: Manual Dial
02: Speed Dial
03: Group List
04: Tx History
05: Scan Size
Sets the shortcut button for the [Internet Fax] tab.
Security Function Broadcast
Destination
ON
Sets whether to indicate the transmission destination number before starting
broadcast transmission.
Confirm Dial
OFF
Sets whether to reenter the transmission destination fax number before
sending.
664