Oki ES4192dn User Manual - page 670
Print From USB Memory Setup
You can set the initial values of the USB Memory function.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Print From USB Memory Setup].
6.
Select an item, and then change the setting.
Press [OK] by following the on-screen instructions if necessary.
7.
Press [Back] until the home screen is displayed.
Item
Factory
default
setting
Description
Default
Settings
Paper
Feed
Tray 1 (A4
or Letter)
Specify a paper tray to use.
Copies
1
Sets the number of copies.
Duplex
OFF
Turns the duplex printing function on or off.
[OFF]: simplex printing
[Long Edge Bind]: duplex printing for long-edge binding
[Short Edge Bind]: duplex printing for short-edge binding
Fit
ON
Specify whether to match the paper.
Override
A4/Letter
Yes
Set the function that automatically switches paper to print from A4 to Letter if a tray runs out of A4
paper and Letter paper is loaded, or from Letter to A4 if a tray runs out of Letter paper.
669