Oki ES4192dn User Manual - page 34
Memo
If [Fit to page(98%)] is selected and the size of the document and the paper are the same, the document is reduced to fit the
paper.
When setting the zoom rate by using the 10-key pad
Enter the zoom rate from 25 to 400% by using the 10-key pad or pressing
on the touch panel, and then press [OK].
Memo
You can set the rate in units of 1%.
If you enter an incorrect value, press the (CLEAR) button, and then enter the correct value.
5.
Press the
(START) button.
Copying starts. The progress status is displayed.
Memo
If [Paper Feed] is set to [Auto], [Zoom] is automatically set to [100%]. To select a different rate, set [Paper Tray], and then set
[Zoom].
If [Paper Feed] is set to [Auto], the paper tray is automatically selected according to the selected zoom rate. To use a specific
paper tray, reset [Paper Feed] again.
Even if [Paper Feed] is set to [Auto], you cannot select a paper tray that holds paper other than A4, B5, A5, A6, Letter, Legal
13/13.5/14, or executive paper. To select a different paper size, set [Paper Feed] again.
If [Paper Feed] is set to [Auto], the [Paper Feed] setting automatically changes by setting [Zoom] to [Auto]. A message is
displayed on the touch panel to inform you that the setting has been changed.
Topics
You can change other copy settings.
Changing Settings before Copying
33