Oki ES4192dn User Manual - page 394
Register the numbers of the senders from whom you want to block junk faxes.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Other Settings].
7.
Press [Block Junk Fax List].
8.
Press [Settings].
9.
Select [Mode2] or [Mode3].
10.
Press [Registered List].
11.
Select a registered box, and then press [Register].
Memo
To change a number that has already been registered, press [Edit] for the box in which the number you want to change is
registered.
12.
Enter the last four to eight digits of the telephone number to block junk faxes by using the 10-key pad.
13.
Press [OK].
14.
Press [Close] on a confirmation screen.
15.
To continue registering another number, repeat the procedure from step 11.
Deleting a Registered Number
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Other Settings].
7.
Press [Block Junk Fax List].
8.
Press [Registered List].
9.
Select a registered box, and then press [Delete].
10.
Press [Yes] on a confirmation screen.
The number is deleted.
393