Oki ES4192dn User Manual - page 526
Setting Sleep Mode
When a set period of time elapses, this machine enters Sleep mode from Power Save mode. In Sleep mode, the status of this machine
is almost the same as when this machine is turned off.
In Sleep mode, the (POWER SAVE) button flashes.
You can register Sleep mode in the following three ways.
Note
If an error has occurred, the machine does not enter Sleep mode.
If a delayed transmission is reserved, the machine does not enter Sleep mode.
If a fax transmission is waiting for a redial, the machine does not enter Sleep mode.
If the wired network connection is switched to the wireless network connection, the machine does not enter Deep Sleep mode but
enters Sleep mode.
If the wireless network connection is switched to the wired network connection, the machine enters Deep Sleep mode.
Exiting Sleep Mode or Deep Sleep Mode to Standby Mode
To exit Sleep mode to standby status, press the (POWER SAVE) button.
Memo
When this machine receives data from a computer or other devices, this machine returns to standby status.
Opening the Web Page of This Machine from a Computer
This section describes how to set Sleep mode from the Web page. You must enter the administrator password to set this setting.
Using Configuration Tool (Windows Only)
This section describes how to set Sleep mode from Configuration Tool. You must enter the administrator password to set this setting.
This section describes how to set Sleep mode from the operator panel of this machine. You must enter the administrator password to
set this setting.
525