Oki ES4192dn User Manual - page 750
Cloning Settings
Cloning the Settings of This Machine
Cloning the Settings of This Machine
You can copy machine's settings to a different device.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the settings you want to clone from [Registered Device Table].
3.
Select the [Device Setting] tab.
4.
Click [Cloning].
5.
Select a cloning destination, and then click [Execute].
6.
Enter the password for the cloning source and target, and then click [OK].
Cloning User Settings
You can copy user settings to a different device.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the settings you want to clone from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Cloning].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Select a cloning destination to and cloning settings.
7.
Click [Execute].
8.
Enter the password for the cloning source and target and click [OK].
Results are displayed.
749