Oki ES4192dn User Manual - page 390
Instructing a Fax Reception from a Telephone Remotely (Remote Switchover
Number)
If the connected telephone is remotely located, you can switch the machine to the fax reception operation by dialing the remote
switchover number on the telephone.
If the connected telephone is not a push line, press the tone button on the telephone to switch to tone (push) signals before dialing the
remote switchover number.
When dialing the remote switchover number, enter the next digit of the number within 3 seconds of dialing the previous digit.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Select [Fax Setup].
6.
Select [Fax Setting].
7.
Press [Remote Receive Number].
8.
Select a number.
Available value settings:
9.
Press [Back] until the home screen is displayed.
389